MartinDB
|
| posted on 24/4/06 at 11:15 PM |
|
|
R1 ('02 inj) cycleloc query.
Being clever(!), when I was tidying my loom, I removed the cyclelocs and connected the wires directly.
The embarassing thing is, the wire that goes from the ignition to the CDI via the cycleloc, I've misplaced it. I don't appear to have any
free wires. I've lost it, having cut the red connector off and extending the others along my centre tunnel.
So, could some kind person tell me which pin on the CDI goes to the blue ignition wire?
Thanks,
Martin.
|
|
|
|
|
speed8
|
| posted on 25/4/06 at 09:41 PM |
|
|
I guess you mean the blue/black wire which is just black on mine. I had a look this afternoon but didn't have my wiring diagram to see what the
black went to.
I'll look again tomorrow.
|
|
|
MartinDB
|
| posted on 25/4/06 at 10:14 PM |
|
|
Yep, it's the Blue/back from the ignition switch to red plug, then black on the loom side of the plug.
I was getting myself confused when I posted the question  .
Thanks,
Martin.
|
|
|
speed8
|
| posted on 27/4/06 at 10:35 AM |
|
|
On mine it goes to pin 43 on the ecu connector. Between a gr/y and a r/wh.
Usual disclaimers etc....
|
|
|
MartinDB
|
| posted on 27/4/06 at 04:08 PM |
|
|
Fantastic. Now I've got no excuses left for putting off starting the bugger  .
Thanks,
Martin.
|
|
|
RichieC
|
| posted on 7/5/06 at 08:15 PM |
|
|
Do you guys have a photo of the cyclelock at all please?
Im struggling to find it (if in fact it was fitted to mine)
Thanks
Richie
|
|
|
MartinDB
|
| posted on 7/5/06 at 08:58 PM |
|
|
There are some pictures in this thread.
Martin.
|
|
|
