kb58
|
| posted on 28/4/06 at 09:35 PM |
|
|
EFI R1 Solidworks model?
A very optimistic request, but boy would it save a ton of time!
Anyone have drawings?
Mid-engine Locost - http://www.midlana.com
And the book - http://www.lulu.com/shop/kurt-bilinski/midlana/paperback/product-21330662.html
Kimini - a tube-frame, carbon shell, Honda Prelude VTEC mid-engine Mini: http://www.kimini.com
And its book -
http://www.lulu.com/shop/kurt-bilinski/kimini-how-to-design-and-build-a-mid-engine-sports-car-from-scratch/paperback/product-4858803.html
|
|
|
|
|
ChrisGamlin
|
| posted on 28/4/06 at 09:42 PM |
|
|
Ive seen a busa one floating about, but not an R1 unfortunately
|
|
|
kb58
|
| posted on 28/4/06 at 10:10 PM |
|
|
It's a chicken-and-egg thing, to build a car you need to draw the parts, but to draw the parts you need the parts to measure. So you have to
buy all the parts before anything can happen, which makes the upfront cost really high.
Right I want to stick to CAD, without spending a fortune on parts...
Mid-engine Locost - http://www.midlana.com
And the book - http://www.lulu.com/shop/kurt-bilinski/midlana/paperback/product-21330662.html
Kimini - a tube-frame, carbon shell, Honda Prelude VTEC mid-engine Mini: http://www.kimini.com
And its book -
http://www.lulu.com/shop/kurt-bilinski/kimini-how-to-design-and-build-a-mid-engine-sports-car-from-scratch/paperback/product-4858803.html
|
|
|
Tralfaz
|
| posted on 28/4/06 at 10:37 PM |
|
|
Kurt,
I spent quite a bit of time searching for one several months back with no luck.
Might be able to help you with some resources and dimensions if you decide to model it yourself.
Brian
|
|
|
