Kev99
|
| posted on 3/6/06 at 06:04 PM |
|
|
Blade Temp
Hi All
At what temp should an 893 RRS 1994 blade engine run at
Kev
|
|
|
|
|
ChrisGamlin
|
| posted on 3/6/06 at 06:06 PM |
|
|
My 919 RRX which is fundamentally the same engine used to run at about 75c on the road, and 80-85c on track, both measured on the bike clocks (digital
readout) and using the bike radiator.
Chris
|
|
|
Crazy Jay
|
| posted on 4/6/06 at 02:13 AM |
|
|
Hey Chris, can u tell me wat temp the R1 fan is supposed to kick in at? With R1 rad and clocks. Cheers 
(sorry for hijack)
|
|
|
ChrisGamlin
|
| posted on 4/6/06 at 11:38 AM |
|
|
Not sure to be honest cos my R1 engine is a 2003 so doesnt have the sender in the radiator like the carb engines, and I havent used the radiator
anyway. At a guess probably just over 100, maybe 105c?
|
|
|
OX
|
| posted on 4/6/06 at 11:50 AM |
|
|
yip its around 104 for the r1
[Edited on 4/6/06 by OX]
|
|
|
Crazy Jay
|
| posted on 4/6/06 at 03:10 PM |
|
|
Thats great! was a bit worried running it waiting for the fan to kick in, think i let it get to 102 before shutting it off. Cheers
|
|
|
Crazy Jay
|
| posted on 4/6/06 at 03:31 PM |
|
|
ah no, think the sensor is gone coz had it up to 106 and the fan didnt come on  and the fan itself is workin coz the autospark tested it.
I'll hav to pick one up tomoro, hopefully the aint too expensive
|
|
|
Darth Blader
|
| posted on 5/6/06 at 10:08 AM |
|
|
My 919 RRW runs (on a sunny day) at around 95-105 deg. The fan kicks in at 95.
I hope to bring this down a bit with my new rad!
Cheers
Rick
Right to Tighten....Left to Loosen
|
|
|
mkblade1
|
 posted on 5/6/06 at 02:10 PM |
|
|
Temp on Blade
Hi my 893 sit's around 80 on ETB gauge, hope this helps
|
|
|
bigrich
|
| posted on 6/6/06 at 07:47 PM |
|
|
919rrw blade 80 ish on digidash touch higher on track (micra rad)
|
|
|
