shortie
|
| posted on 23/10/06 at 12:51 PM |
|
|
Fireblade oil level
Just wanted to check how you check the oil level on the blade, I am just wondering if you should screw the plug in and then undo it and read the level
or just push it in (but not screw it) and then remove and check level??
ta,
Rich.
|
|
|
|
|
mkblade
|
| posted on 23/10/06 at 01:44 PM |
|
|
rich
ive always checked mine through the eye glass mine is the 919cc though
si
|
|
|
Toady1
|
| posted on 23/10/06 at 02:24 PM |
|
|
my 954cc lump is checked via a sight glass.
|
|
|
shortie
|
| posted on 23/10/06 at 02:38 PM |
|
|
Guys, bear in mind it's an 893 and doesn't have a sight glass, only dipstick.
Rich.
|
|
|
ReMan
|
| posted on 23/10/06 at 02:48 PM |
|
|
Rest the dipstick on top. the manual confirms this.
(How are you mate?) 
On hol this week, just been out for about a whole tankfull
|
|
|
shortie
|
| posted on 23/10/06 at 09:02 PM |
|
|
Off to Brands tommorrow, hoepfully will be dry!
If I overfill a bit will it matter??
It's just over the top mark on the dipstick after I filled it up but haven't run it yet
Is this ik?
Rich.
|
|
|
ReMan
|
| posted on 24/10/06 at 08:18 AM |
|
|
No
Enjoy
|
|
|
