Gav
|
| posted on 24/11/06 at 12:30 PM |
|
|
Blade fuel filter
Ive just plumbed in the blade pump in final preperation as im going to start my engine today(wahoo!) and i realised i missed out the fuel filter, the
haynes manual states this goes between the the tank and the pump, but this would be hard to fit it in
See Here would it be alright fitting it after the pump?
|
|
|
|
|
graememk
|
| posted on 24/11/06 at 12:44 PM |
|
|
depends if you want to bugger your pump up or not, just get one of the cheap inline ones from linco.
[
[Edited on 24/11/06 by graememk]
|
|
|
mark.s
|
| posted on 24/11/06 at 07:45 PM |
|
|
wouldn't one of those little inline clear filters fit in between the tank and pump, i would post a pic up....but im crap
cheers mark
|
|
|
Gav
|
| posted on 24/11/06 at 09:09 PM |
|
|
Had a look in halfords today and the smallest one they had wasnt much smaller than the blade one and the inlet/outlet pipes were to small anyway
|
|
|
chockymonster
|
| posted on 25/11/06 at 12:22 AM |
|
|
I put a small glass filter with 10mm tails between the tank and the pump and then a focus 2.0 filter between the pump and the engine in case the pump
destroyed itself.
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
