Gav
|
| posted on 17/1/07 at 09:55 PM |
|
|
Start relay feed to rectifier?
The wire that is supposed to come from the blade start relay to the rectifier is this just a 12v feed?
Reason i ask is that the relay i have is from a suzuki of ebay and their are 4 terminals on the back of it, i figured out which is the relay switch
terminals but their are two spare, jsut need to figure out if its to feed 12v to the rectifier while the engine is turning over on the start switch.
|
|
|
|
|
bigrich
|
| posted on 17/1/07 at 11:03 PM |
|
|
if its a red wire with a white trace then its 12 volts from the main fuse in the start relay to the regulator
Rich
ps if you need a diagram i have one i could email to you
[Edited on 17/1/07 by bigrich]
|
|
|
Gav
|
| posted on 18/1/07 at 11:55 AM |
|
|
Thanks Rich,
I have a diagram that i got from MK's site (by shortie?)
Yes it was the red/white wire from the diagram, but i was unsure of what it was doing as i dont have the blade starter relay.
cheers
gav.
|
|
|
