scootz
|
| posted on 22/3/07 at 10:47 AM |
|
|
Using 06 R1 Fuel Pump
My engine kit came with an 06 R1 Fuel Pump. I was going to try and install it direct to my tank (without Swirl Pot). Good or bad idea?
|
|
|
|
|
jimgiblett
|
| posted on 22/3/07 at 11:01 AM |
|
|
Not a very good idea unless you have some other method of avoiding fuel surge.
- Jim
|
|
|
scootz
|
| posted on 22/3/07 at 11:29 AM |
|
|
So, I'm guessing it's normal fuel pump to Swirl Pot, then R1 pump to TB's?
|
|
|
Hellfire
|
| posted on 22/3/07 at 12:11 PM |
|
|
If you're getting your fuel tank custom made, just put a 2-3 inch sump on the bottom of the tank and install your pump into that.
Phil
Something like this
[Edited on 22-3-07 by Hellfire]
|
|
|
