scootz
|
| posted on 3/5/07 at 06:43 PM |
|
|
R1 Velocity Stacks
I recently bought a rather nice set of used stacks from a WSB Team.
Two long - Two short. I take it the longer two go on the 'middle' TB's?
Also, these stacks slip-in to the TB aperture and at a common point across all stacks there is a threaded section. Is this in someway used to secure
the filter/airbox baseplate in situ?
As you can tell - I've never played about with TB's before!
If it helps, I would suspect these stacks have come from the YEC (Yamaha Engineering Corp).
|
|
|
|
|
jimgiblett
|
| posted on 3/5/07 at 09:16 PM |
|
|
I have Graves velocity stacks fitted to mine and yes they recommend the longer trumpets on the inner TBs.
The velocity stacks all have a groove in them which locates to the airbox.
- Jim
|
|
|
