R1 sprocket nut size

Not logged in [Login - Register]

LocostBuilders » Forum » BEC » R1 sprocket nut size

Power Tools at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

smart51

Contributor

Posts 7399
Registered 23/12/04
Location Birmingham
Member Is Offline

Photo Archive Go!

Building: MNR VortX R1 - sold, cabin-scooter - stolen, next?

posted on 2/8/07 at 11:46 AM

R1 sprocket nut size

What size socket do I need for the nut on the end of an R1 output shaft?

Coose

Posting Freak

Posts 1316
Registered 14/10/04
Location Malton
Member Is Offline

Photo Archive Go!

Building: R1 Striker (no.6) now sold and gone to Italy....

posted on 2/8/07 at 11:51 AM

36mm.

Spin 'er off Well...

StevieB

Contributor

Posts 3273
Registered 27/8/06
Location York
Member Is Offline

Photo Archive Go!

Building: up courage to start again...

posted on 2/8/07 at 05:48 PM

And if you're fortunate enough to find a socket the right size for cheap and someone says 'buy it' and you don't, you'll only live to regret it!

smart51

Contributor

Posts 7399
Registered 23/12/04
Location Birmingham
Member Is Offline

Photo Archive Go!

Building: MNR VortX R1 - sold, cabin-scooter - stolen, next?

posted on 2/8/07 at 06:21 PM

Cheers guys. I was offered ones for £20 but eventually found one for £8.

LocostBuilders » Forum » BEC » R1 sprocket nut size

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.