oadamo
|
| posted on 11/12/07 at 10:18 PM |
|
|
cbr1000 prop flange
hi how do you fit the prop flange because the clutch housing is part of the cover.anyone got a pic
thanks adam
|
|
|
|
|
Shandylegs
|
| posted on 11/12/07 at 10:52 PM |
|
|
Couple of ways:
-space out the clinder from the prop for more clearance
or
-cut the cover so the prop fits and fabricate a sandwich plate to hold the cylinder in (See my picture archive).
Thanks.........
[Edited on 11/12/07 by Shandylegs]
|
|
|
beppesignori
|
| posted on 13/12/07 at 03:06 AM |
|
|
I have added 2 pics to my archive to show how i made space for the propshaft. Spacing out the Slave, and trimming the housing of the Slave. Just
lengthen the pushrod by the same ammount as you space out the slave.
|
|
|
oadamo
|
| posted on 13/12/07 at 06:09 PM |
|
|
thanks lads for your help. i get the idea now.
adam
|
|
|
