timbo7
|
| posted on 13/2/06 at 04:15 PM |
|
|
ZX9 wiring
I need someone to clarify I have reconnected the correct pins post stripping the engine loom in preparation for change to Sprinting championship Class
9.
(ZX9RE)
There are 3 large core yellow wires that run from the rectifier to a 3 pin round black plug. The other end of this plug collects to a 6 pin black plug
that feeds the generator (x3 yellow) + 1x LG = neutral & 1x LU (5 pin outs in total used)
I have dismantled the round black connector with the 3 large yellow wires that feed from the generator black rectangular 6 pin connector. Can anyone
the correct pins outs for these three yellow wires in the round black plug?
WESTFIELD HAYABUSA 1400 - SOLD
|
|
|
|
|
stevec
|
| posted on 13/2/06 at 05:44 PM |
|
|
The Three yellow wires are the three phase wires from the generator and all do the same thing so it should not matter which of the black wires they go
to.
Hopefully someone else will confirm this for you.
Cheers.
Steve
[Edited on 13/2/06 by stevec]
|
|
|
Wadders
|
| posted on 13/2/06 at 06:06 PM |
|
|
Confirmed 
]Originally posted by stevec
The Three yellow wires are the three phase wires from the generator and all do the same thing so it should not matter which of the black wires they go
to.
Hopefully someone else will confirm this for you.
Cheers.
Steve
[Edited on 13/2/06 by stevec]
|
|
|
timbo7
|
| posted on 13/2/06 at 07:27 PM |
|
|
cheers! 
WESTFIELD HAYABUSA 1400 - SOLD
|
|
|
