welderman
|
| posted on 24/1/07 at 08:26 AM |
|
|
HondA Fireblade headers
Anyone know the inside and outside diameter of the tube use for the headers?.
Please.
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
|
|
welderman
|
| posted on 24/1/07 at 09:53 AM |
|
|
If anyones interested, 32mm inside with 3mm wall.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
jack trolley
|
 posted on 24/1/07 at 06:34 PM |
|
|
I doubt it's 3mm wall all the way along the tube; probably just a thick section at
the top where it's attached to the engine.
|
|
|
G.Man
|
| posted on 24/1/07 at 07:49 PM |
|
|
indeed... 1-1.2 sounds more like rest of header
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
|
welderman
|
| posted on 25/1/07 at 07:39 AM |
|
|
Thanks lads, should have put thats what im using.
Joe
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
