Colnago_Man
|
| posted on 31/1/07 at 08:59 AM |
|
|
Mechanical BEC Clock v Acewell
I'd like to use to original bike clocks from my ZX9R'B but it has a mechanical speedo. Is it possible to adapt the speedo to take an
electric input or should I go for an Acewell/Vaypour type instead?
Thanks.
[Edited on 31/1/07 by Colnago_Man]
|
|
|
|
|
02GF74
|
| posted on 31/1/07 at 09:27 AM |
|
|
not easily. I am working on doing this at the moment and have a DC motor to drive the speedo.
The difficult part is to have a sensor and a controller to turn the motor at the required speed. I am using a PIC for the controller and yet to make
the sensor.
|
|
|
the_fbi
|
| posted on 31/1/07 at 10:08 AM |
|
|
The likes of Stack and SPA do mechanical to electrical convertors for about £30.
That said, and Acewell is a good solution.
|
|
|
