zxrlocost
|
| posted on 3/4/07 at 02:47 PM |
|
|
Watch out Turbo BEC boys.........
Ive just picked up my Part Built Indy which has been stood for a good year
and anyway plastered all over the 919 engine is HOB Motorsport.. with a few engraved codes on the cylinder head
The chap was a keen biker and told me the engine has been tuned to the extent he was scared of hitting the limiter
well anyway just out interest I phoned HOB to see what extent they tune and what the codes meant.
they asked for the chaps name and the code on the engine....
ill be back in a minute he said
holy mary he came back on the phone and said - that blade left Hob with 171bhp at the crank
he also had a long read off of mods
Blumin Heck I take RR figures with a pinch of salt and please this is by no means "PROOF"
but Im still happy wooohooooooO!!!!!!!
how much would all that have cost!?
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
|
ruskino80
|
| posted on 3/4/07 at 02:56 PM |
|
|
sweet -should be awesome!!!
|
|
|
smart51
|
| posted on 3/4/07 at 03:03 PM |
|
|
Very nice. My R1 engine was recently tuned to 152 RW BHP (usual dyno caveats apply) which probably means 170ish at the flywheel. It goes a whole lot
quicker now it's been done, So much so that at 9000 ish, the rev counter looks like I'm doing wheel spins. It sounds like you've
found a very nice engine.
|
|
|
zxrlocost
|
| posted on 3/4/07 at 03:11 PM |
|
|
I was reading your post colin sounded good
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
Agriv8
|
| posted on 3/4/07 at 03:27 PM |
|
|
quote:
Originally posted by zxrlocost
Ive just picked up my Part Built Indy which has been stood for a good year
and anyway plastered all over the 919 engine is HOB Motorsport.. with a few engraved codes on the cylinder head
The chap was a keen biker and told me the engine has been tuned to the extent he was scared of hitting the limiter
well anyway just out interest I phoned HOB to see what extent they tune and what the codes meant.
they asked for the chaps name and the code on the engine....
ill be back in a minute he said
holy mary he came back on the phone and said - that blade left Hob with 171bhp at the crank
he also had a long read off of mods
Blumin Heck I take RR figures with a pinch of salt and please this is by no means "PROOF"
but Im still happy wooohooooooO!!!!!!!
how much would all that have cost!?
can you tell me what numbers you will be picking on Sat Night. 
Regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
zxrlocost
|
| posted on 3/4/07 at 05:44 PM |
|
|
ok ta ill fit a 5k rev limiter hehe!
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
dilley
|
| posted on 3/4/07 at 06:31 PM |
|
|
you gonna join us then???
|
|
|
zxrlocost
|
| posted on 3/4/07 at 11:00 PM |
|
|
listen just because you like the easy way out with your turbo's
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
dilley
|
| posted on 4/4/07 at 07:10 AM |
|
|
come over to the dark side
|
|
|
