imp paul
|
| posted on 23/8/07 at 08:41 PM |
|
|
re turbo zx12r imp
hi lads had a chat with malc at MB CUSTOMS today and got some new parts on the way 1 set of je pistons 1 sp head gasket 1 set of ape cam gears 1 set
of new uprated valve springs 1 ape head stud kit 1 uprated clutch spring kit all i need now is tial 38mm waste gate and fmu let the madness begin
£££££ gone a bit over my price but the imp needs more power lol hm mm its all weldermans fault lol
[Edited on 23/8/07 by imp paul]
|
|
|
|
|
imp paul
|
| posted on 23/8/07 at 09:01 PM |
|
|
up to my hips in it 
|
|
|
Moorron
|
| posted on 23/8/07 at 09:25 PM |
|
|
your not going for the locost way then
Will nice to see the results. keep us posted.
Sorry about my spelling, im an engineer and only work in numbers.
|
|
|
welderman
|
| posted on 23/8/07 at 09:54 PM |
|
|
cant blame me mate, but if you had not have ordered the stuff, you would never have known.
Never under estimate the POWER of the Dark Side.
Feel the force.
 
Rescued attachment 9634_957126t.jpg
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
clutch_kick
|
| posted on 23/8/07 at 10:19 PM |
|
|
Paul, how will you handle engine management? Power commander or a seperate programmable ECU?
will you be adding injectors or upgrading to larger injectors?
|
|
|
worX
|
| posted on 24/8/07 at 05:12 AM |
|
|
I was reading your first post thinking that it would of cost a bit but not millions until you mentioned the Tial wastegate! They are so dear, I was
shocked when I found out the price of them!
Steve
and Yes, it's all weldermans fault...
|
|
|
welderman
|
| posted on 24/8/07 at 06:51 AM |
|
|
Stop it no no no, just because i held a gun to your head Steve and made you phone Malc at MB CUSTOMS, you did not have to order any parts.
Thats MB CUSTOMS, http://www.mbcustoms.co.uk/
Theres something missing in this picture, TURBO anyone.
 
Rescued attachment worx.jpg
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
imp paul
|
| posted on 24/8/07 at 05:10 PM |
|
|
re engine
hi lads well im going to use a power commander type r and a begli fmu reg for the fuel from http://www.mbcustoms.co.uk/ as malc is the turbo king
|
|
|
welderman
|
| posted on 25/8/07 at 02:40 AM |
|
|
good on you.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
.JPG)
