jkarran
|
| posted on 7/1/08 at 11:10 AM |
|
|
35mm stainless exhaust bits?
Anyone know where I can get tube and bends in 35mm od (1 to 1.5mm wall) stainless to make an R1 manifold? Ideally not too pricey!
38mm is common but too big.
jk
|
|
|
|
|
welderman
|
| posted on 7/1/08 at 11:32 AM |
|
|
like these.
 
Rescued attachment bends.jpg
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
jkarran
|
| posted on 7/1/08 at 11:57 AM |
|
|
Er... probably 
Are they 35mm od and equally important, where are they from?
jk
|
|
|
welderman
|
| posted on 7/1/08 at 02:27 PM |
|
|
35mm od, c/w 1.5mm wall in grade 316 stainless.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
jkarran
|
| posted on 7/1/08 at 02:48 PM |
|
|
Sounds good. I'm a bit confused, are you selling these or am I missing a link to where I can buy them?
If you're selling them then let me know what you're after for them.
<edit> I just checked mine (it's not for my car) and they're 38mm anyway! I never realised it wasn't stock dia.
I'm still unsure where to buy them
jk
[Edited on 7/1/08 by jkarran]
|
|
|
welderman
|
| posted on 7/1/08 at 06:39 PM |
|
|
so what size are you after, i did send you a u2u.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
jkarran
|
| posted on 7/1/08 at 09:56 PM |
|
|
cheers, I just spotted the u2u, I must have my account setup wrong.
|
|
|
r1 locost
|
| posted on 8/1/08 at 09:14 PM |
|
|
exhaust bits
try www.zorstec.com well worth a look
|
|
|
