Good donor cable handbrake LEVER ideas needed.

I’m looking for a donor handbrake lever(cable type) that will ideally bolt onto the top of the prop tunnel with the pivot/cable bar being under the tunnel. Ideally I would like it all to seal. I have viewed a few images and think mk 2 clio type could do the job, but not sure if the seals look rite. Any ideas as I will then go to scrap yard and pick one up.

I am using golf rear callipers and cables, but will adapt any suitable lever to fit these cables. I will also need a hydraulic fly off hand brake, but that should be easy to fabricate myself.

Thanks in advance, Andrew.

[Edited on 4/5/13 by unijacko67]