johnny chimpo
|
posted on 12/6/17 at 01:37 PM |
|
|
Sierra Driveshafts
Hi all, trying to reignite my interest in my project and I am starting to focus on getting my 3.38 diff and push in shafts rebuilt.
The diff rebuild is in hand so now I am on to the shafts. Does anyone know if there is a rebuild kit available for sierra driveshafts? Ideally looking
for inner and outer metal canisters and cv boots for both shafts. I've been googling and discovered there are two sizes of canister 70mm and
77mm, mine are the 77mm ones, but I cant find a ford part number or anybody that stocks the parts I need.
Thanks for any help!
|
|
|
gingerprince
|
posted on 12/6/17 at 02:51 PM |
|
|
The canisters are like rocking horse poo now. I needed some a year ago and couldn't find anyone to stock them, so ended up having to tiger seal
the existing one... Think the only way was to buy complete driveshafts.
|
|
nick205
|
posted on 12/6/17 at 03:21 PM |
|
|
Some years ago now I was able to source rebuild kits (including metal canisters) from my local Ford dealer. IIRC they weren't that expensive
either. May well be worth speaking to a Ford dealer parts counter to see what they can supply.
It wasn't easy trying to peen the ends of the metal canisters closed over the ends of the joints, but patience and a vice helped.
Some photos in my archive of the overhauled driveshafts for you to look at.
Buton Power do Ford parts and may be worth a call.
[Edited on 12/6/17 by nick205]
|
|
HowardB
|
posted on 12/6/17 at 03:30 PM |
|
|
tried to replace my canisters and gave up, concluded that I need to change the diff and drive shafts when I can afford to, the other option may be to
change the diff receptacles,.
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
johnny chimpo
|
posted on 12/6/17 at 04:27 PM |
|
|
Thanks guys, I feared that was going to be the answer!
I've found someone on ebay selling brand new driveshafts, albeit not original ford ones so I may need to look into this further.
FORD SIERRA 2.0 PETROL DRIVESHAFT NEAR/SIDE & CV JOINT 1982>1993
Thanks for the help.
|
|
raptor700
|
posted on 12/6/17 at 08:11 PM |
|
|
I have the j.r brand new driveshafts
£149 fir a pair brand new , wouldn't even entertain rebuilding a pair of 20 year old driveshaft . Bargain if u ask me !!!!!
|
|