FS Dunlop Wheel Alignment Gauge, Sytec Filters and Gear indicator for Busa
Paul_Arion - 27/8/21 at 05:03 PM
Hi All
I have a Dunlop Optical wheel alignment gauge that i dont really use at all, so thought with Stoneleigh being this weekend (i'm there Sunday),
i'd see if there is any interest in these from the kit car community.
These are old, but still accurate so long as they are carefully set up as per the pic (ensuring the gauge indicator reads zero with the arms just
touching).
I think they are the AG040 model (not sure what the difference is with the AGO30 anyway).
Looking for £60 for the gauges
As mentioned, i can bring to the show on Sunday or collection from Cannock, Staffs.
Also for sale are two virtually as new Sytec Bullet Fuel Filters (one blue with red cap, and one red with blue cap). Both were only fitted to my race
car before deciding to convert straight to methanol and so have only been used on a running car for about 60 seconds - so as new. Each comes with
AN-6 fittings and i do also have a set of 12mm hose tails. Both also come with 2 filter cartridges - both have an 8 micron paper filter (final
filtration after the fuel pump) and also a 55 micron Stainless filer (ideal pre-filter). £30 each posted or £25 collection at Stoneleigh on Sunday.
If anyone is interested in a Geartronics gear indicator for the Suzuki Hayabusa (for the standard gear sensor), i have one of those also but
haven't taken a pic yet - tell a lie i found a couple. Few years old now but works just fine and over £100 new. Will be looking for £35 for
that
Description
Blue Sytec
Red Sytec
Description
Description
[Edited on 27/8/21 by Paul_Arion]
CRAIGR - 27/8/21 at 07:17 PM
Damn would have had the gauges in a heartbeat but not going this year 
[Edited on 27/8/21 by CRAIGR]
Paul_Arion - 27/8/21 at 08:07 PM
Too bulky and easy to bend out of alignment to post sorry Craig - they would need completely stripping down and then re-aligning
[Edited on 27/8/21 by Paul_Arion]
CRAIGR - 27/8/21 at 08:13 PM
Quite understand Paul . Slim chance mate is going up tomorrow and staying over . Don’t have the old dunlop caster gauge too do you 
adithorp - 27/8/21 at 08:42 PM
Get your arse in gear and get up here Craig.
CRAIGR - 27/8/21 at 08:52 PM
You’d only lead me astray Adi
Paul_Arion - 27/8/21 at 08:54 PM
quote:
Originally posted by CRAIGR
Quite understand Paul . Slim chance mate is going up tomorrow and staying over . Don’t have the old dunlop caster gauge too do you
I dont sorry - i have a Blackline digital Caster / Camber gauge that i use, along with a set of turntables
femster87 - 28/8/21 at 04:32 AM
i will take the blue Sytec Bullet Fuel Filters posted please
Paul_Arion - 28/8/21 at 04:53 AM
That’s all yours - U2U sent
Red one still available (circa £55 new with the paper element plus £20 for the extra stainless element when new)
adithorp - 28/8/21 at 07:14 AM
quote:
Originally posted by CRAIGR
You’d only lead me astray Adi
You mean with beer and fried breakfasts?
Paul_Arion - 30/8/21 at 08:07 AM
Both filters now sold 😎
rickymcg - 30/8/21 at 10:07 AM
Hi you have pm refer geartronics
Paul_Arion - 30/8/21 at 11:25 AM
quote:
Originally posted by rickymcg
Hi you have pm refer geartronics
Hi Ricky
PM sent in return
cheers
Paul
Paul_Arion - 30/8/21 at 12:12 PM
Sale now agreed on the Dunlop gauges. Just awaiting collection
Paul_Arion - 31/8/21 at 01:09 PM
All now sold and paid for / collected
brownie - 22/4/24 at 09:12 AM
Does any one have a second hand set of dunlop tracking gauges they would part with?
