Board logo

Pedal anti slip
loggyboy - 20/4/12 at 08:03 AM

Anyone ever had this as an issue at IVA? My raw supplied pedals are just smooth. do i need to add something to satisfy IVA man?

fesycresy - 20/4/12 at 08:09 AM

Yes you need it.

You can get some sticky back stuff from Car Builders, I think.

snakebelly - 20/4/12 at 08:10 AM

skateboard grip tape, plenty on ebay

fesycresy - 20/4/12 at 08:11 AM

Here you go

pedal tape link

HowardB - 20/4/12 at 08:20 AM

I've probably got some in the garage I can post you if it's not urgent,.....

franky - 20/4/12 at 08:21 AM

I used a 1mm cutting disc and cross-hatched them. Locost style

loggyboy - 20/4/12 at 08:29 AM

Cheers guys, thanks for the offers too. I have some self adehsive stuff Ive had for years, so will use that, I just wondered if Id read the manual wrong as its not something ive seen crop up before.

Peteff - 20/4/12 at 10:54 AM

40 grit aluminium oxide paper is cheap alternative.

JeffJeffers - 20/4/12 at 11:50 AM

I used some Corsa C pedal rubbers. Only £2.50 each and look fairly good.

Dingz - 20/4/12 at 12:56 PM

its an MOT failure point too but only on the brake pedal I think.