Have any of you needed to grind smooth any of the casting imperfections or edges on the sierra uptights prior to SVA or have many of you passed without getting the grinder on them?

Thanks

mine were all ok mate, why not just smooth some pu or silocone over the high or rough bits

I was more on about the edges on the upright around the 'lug' where the track rod end bolts to and where the bottom ball joint attaches to and the sharp bits where the bolt goes through when clamping p the mushroom adaptors.

i dont think the sva guys ball thingy will go in there

I rounded the edges on my Cortina uprights, just to be sure.

Geoff