Board logo

Wiring Loom covering
Avoneer - 6/5/07 at 05:24 PM

Hi All,

Been a long time since my last SVA so could someone remind of the requirements for the loom.

Does it have to be spiral wrapped/convuluted tubed or will loom tape do?

Thanks,

Pat...


ReMan - 6/5/07 at 05:26 PM

Im sure loom tape is perfectly acceptable.Convothingy tube can be easier in places.
I used both and it was fine


zetec - 6/5/07 at 06:31 PM

Do as much tube as poss, looks far better and allows easy access if any wiring faults or you need to add anything.