Board logo

Vin/Chassis No
The Doc - 13/7/07 at 09:40 AM

Does this look OK for Swansea?

MJD19562007


Syd Bridge - 13/7/07 at 09:41 AM

Needs to be 17 characters.


ned - 13/7/07 at 09:41 AM

looks a bit short, thoght they were longer than that?

Ned.


DarrenW - 13/7/07 at 09:42 AM

i thought it had to be 17 digits


coozer - 13/7/07 at 09:49 AM

Bulk it out with XXX's and WWW's like ford do


The Doc - 13/7/07 at 09:50 AM

Any combination of characters and Numbers?

Or how many of each?

TA


ReMan - 13/7/07 at 10:34 AM

I believe it is to be at least 8, to a maximum of 17 digits, that should be OK.


BenB - 13/7/07 at 12:08 PM

It doesn't have to be 17 digits but it will make the DVLA happy (and make registration easier). They tried to persuade me it had to be 17 characters until I asked what they did about foreign imports.....
It has to be a number which is unlikely to be on any other car so XXXXXXXXA1 probably wouldn't pass.
Personally I'd stick a LOCOST on the end.
Then it'd be 17 digits and everyone should be happy.


The Doc - 13/7/07 at 05:43 PM

Thanks,

that's what I'll do to be on the safe side

Now:

What about the size of the letters and how located?

Is an ali plate with punched letters the way to go?


ReMan - 14/7/07 at 08:58 AM

Min 4mm letters, and in an easily visible position
Ally plate rivetted on was fine for my SVA/DVLA, though this varys, see recent thread, http://www.locostbuilders.co.uk/viewthread.php?tid=67813