Board logo

underdash area
Stuart_B - 3/9/08 at 04:25 PM

hi all, does the underside of the dash need to be covered up or can it be left open?

thanks

stuart


adithorp - 3/9/08 at 04:38 PM

Lower dash edge has to be radiused (19mm). The area behind that is covered by the normal contactable sharp edges rules. They don't want you cutting your legs off in a shunt!

Its simpler to put something under there. I put some carpet under held in by velcro and had no problems. They had a good look despite it being harder to check under there on the Fury than a 7.

adrian


smart51 - 3/9/08 at 07:48 PM

I didn't panel under mine and it passed. There wasn't anything to contact though.