Board logo

newcastle (gosforth) SVA
Krismc - 2/11/08 at 04:49 PM

had a few people say not to take the mnr too newcastle for sva?? but i only live a few miles from it.

what would they fail me on that other places wouldnt


jambojeef - 2/11/08 at 05:16 PM

They passed mine mate - how tough can they be?!

They guy was quite thorough but get it down there - whats the worst that could happen?


Krismc - 2/11/08 at 06:14 PM

thats what i thought mate, i need a sva cheat bar, some mirrors and some indicators and i think im sorted.

[Edited on 2/11/08 by Krismc]


wrigglypig - 2/11/08 at 07:43 PM

whats a cheat bar?


Krismc - 2/11/08 at 08:00 PM

A bar to hold my indicators and protect my suspension from the sharp edge rule.


coozer - 2/11/08 at 10:13 PM

do you want my indicator bar Kris??


DarrenW - 3/11/08 at 12:39 PM

Gosforth seem to have had an issue with MNR's in the past. Rob Ryan might be worth chatting to. I seem to recall the ali steering rack extensions were an issue for him.

Be prepared for them to check any indicator bars very carefully. I seem to recall he mentioned that by rights they should be structural ish and act as a bumper.

Gosforth have a reputation for being more strict than some other places but i passed there (2nd time) and felt that he was fair.


Krismc - 3/11/08 at 05:15 PM

quote:
Originally posted by coozer
do you want my indicator bar Kris??


Would love it mate, only to borrow obviuolslllyys ley(or however its spelt)


Krismc - 3/11/08 at 05:17 PM

quote:
Originally posted by DarrenW
Gosforth seem to have had an issue with MNR's in the past. Rob Ryan might be worth chatting to. I seem to recall the ali steering rack extensions were an issue for him.

Be prepared for them to check any indicator bars very carefully. I seem to recall he mentioned that by rights they should be structural ish and act as a bumper.

Gosforth have a reputation for being more strict than some other places but i passed there (2nd time) and felt that he was fair.


Well i could bolt it too chassis i suppose but how big a bolt can i put through chassis without causing it too weaken.