Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Temporary engine for IVA
Dan.

posted on 29/10/09 at 11:39 PM Reply With Quote
Temporary engine for IVA

Hi All,
I am looking to put a silly engine in my car wut finding the correct partys / donors is taking longer than I would like.
If I were to fit a pinto lump say out of a 1.6 then later convert it to my engine of choice what is legally required? will it need another test of some sort? How will emissions be judged if it was originally registered with a pinto lump etc.

thanking you

Dan

View User's Profile View All Posts By User U2U Member
iank

posted on 29/10/09 at 11:50 PM Reply With Quote
Rules are the same as for any engine transplant. They've recently been tightened up a bit but are still quite easy if you plan ahead.

Here -> http://www.direct.gov.uk/en/Motoring/OwningAVehicle/ChangesToYourRegistrationCertificate/DG_4022054

Emissions at MOT will be the same levels as the pinto and depend on the registration you get (new, age related or Q)





--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous

View User's Profile View All Posts By User U2U Member
Dan.

posted on 29/10/09 at 11:56 PM Reply With Quote
Looks simple enough, now to look for a cheapo donor engine
View User's Profile View All Posts By User U2U Member
blakep82

posted on 30/10/09 at 02:04 AM Reply With Quote
i'd thought about this a while back, but depends what you go from and to. you'll most likely need new exhaust, engine mounts, some plumbing, bell housing, perhaps even different length prop shaft.
or you may not, but it could end up more expensive and more hassle than its really worh





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
Dan.

posted on 30/10/09 at 03:42 AM Reply With Quote
Exhaust & mounts are a given, bell housing and box are the issue causing me to have the temporary lump and I alredy have a prop shaft modified for the pinto lump so that'll give me time to save top have it modified for the new engine / gearbox. The only reaal issue is the cut outs for the exhaust but I suppose I can put a temporary skin on the car for the initial engine anyway.

Thanks for the input

[Edited on 30/10/09 by Dan.]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.