stevegough
|
 posted on 13/6/10 at 07:29 PM |
|
|
windscreen supports. - Radius compliance
Just assembling my windscreen - I have some S/Steel supports which are 2.5mm thick - does anyone know if they have to be radiused to 2.5mm or can they
be merely 'blunted'?
See IVA manual, section 12 (interior fittings) - there is a reference in Annex 1 “Specified Zone Exempt Areas” to the windscreen side pillars - does
that mean they are exempt?
Anybody had a fail for this?
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
|
|
|
austin man
|
| posted on 13/6/10 at 07:49 PM |
|
|
fit after the IVA then the radius isn't a problem
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
speedyxjs
|
| posted on 13/6/10 at 08:08 PM |
|
|
^^^What Austin man says. Thats what im doing 
How long can i resist the temptation to drop a V8 in?
|
|
|
snapper
|
| posted on 14/6/10 at 05:50 AM |
|
|
It is worth blunting or you can glue on some edge trim
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
stevegough
|
| posted on 14/6/10 at 08:20 AM |
|
|
Thanks for the replys, but I am fairly committed to fitting the screen - Austin and Speedy - Built a heater, fitted washers, wipers are next - so -
snappers idea looks good to me - found this on ebay - will it do the trick? note its width is 4.5mm - will it be 'round' enough?
Trim link
Cheers!
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
|
.jpg)
