corrado vr6
|
| posted on 14/6/10 at 09:24 PM |
|
|
Help with IVA forms
Hi, after doing a search i see the questions i am abot to ask have been asked before but no replys to answer the questions, so thought i would ask
again on the off chance
A quick lo down on my build, its an MK Indy with a 06 yamaha R1 engine with a 3.38 sierra diff and drive shafts.
Basically im filling in my IVA forms and have got to the section
(3o) "what is the design road speed of the vehicle ?" Im not really to sure what this would be for the MK?
The next question is (3p) "what is the engine maximum power and the engine speed at which it is obtained?" again not sure what to put
here?
(3q) What are the design weights of the vehicle?
(3c) What is the date of manufacture? was thinking of putting the date of when i get my vin number from DVLA?
Any help advice will be much appriciated
Greg
http://r1indy7.wordpress.com/
|
|
|
|
|
raptor700
|
| posted on 14/6/10 at 09:34 PM |
|
|
[Edited on 14/6/10 by raptor700]
|
|
|
raptor700
|
| posted on 14/6/10 at 09:34 PM |
|
|
first you need to know what your tires are rated at they will have a zr or soemthing on the side wall, basically if your top speed is more than the
rated tires then you will fail, i have a gsxr 1000 k5 and put 130 my tires will do 150+
for the power of your bike, type it in google and it will say for example 178 bhp
for the engine speed you want to find where it produces maximum torque about 6800rpm
the design weight are on a sheet i got from mk i can send you them tom
date of manufacture just put last month or todays date
[Edited on 14/6/10 by raptor700]
|
|
|
RIE
|
| posted on 14/6/10 at 09:41 PM |
|
|
quote:
Originally posted by raptor700
for the engine speed you want to find where it produces maximum torque about 6800rpm
Not quite, it's asking for the engine speed at which it makes max power not max torque, should be somewhere around 11K on an R1.
[Edited on 14/6/10 by RIE]
|
|
|
corrado vr6
|
| posted on 14/6/10 at 10:00 PM |
|
|
A big thanks to both of you for replying really was struggling to get my head around this, but is becoming clearer!
I have done a search for my engine and it shows 126.0 KW 12500 rpm
172.58 bhp
I will look at my tyres tomorrow for the max speed rating, I was also thinking of putting 130 mph for max speed as it will be limited by the diff id
have thought?
tom any chance you could send on those weights from that sheet
thanks again
http://r1indy7.wordpress.com/
|
|
|
raptor700
|
| posted on 14/6/10 at 10:14 PM |
|
|
am just passin on stuff that people told me from on here as i asked the same questions
yeah think 130 is what i thought
i put 6800 rpm just because they will use this and someone said try and put it lower not sure if they use if for the nosie or the emissions.
the weights off the mk sheets aree
design weight axle 1-: 450kg
design weight axle 2 -:450kg
gross wehicle weight -: 900kg
total unlaiden weight-: 500kg
dont forget to fill in the amature build decleration, print off some pics of your car and photocopy your recipts
owt else just send me a message have just had my call today form the test centre today rtegardin my iva
|
|
|
