scootz
|
| posted on 3/8/11 at 07:25 PM |
|
|
DOT Marked (Only) Tyres & MOT / MSVA
Does anyone know if DOT marked tyres (not e-marked) are suitable for MOT and MSVA (bike / trike test).
Cheers
Scotty
It's Evolution Baby!
|
|
|
|
|
minitici
|
| posted on 3/8/11 at 07:46 PM |
|
|
RTFM - LOL
1. Check that each tyre is moulded so that it displays permanently the following
information;
a) “E” or “e”, JIS (Japanese) or DOT (American) or BSAU 144 (car
remould tyres) approval marking. Note: DOT approval is only
acceptable if a service description (load/speed rating) is present.
|
|
|
scootz
|
| posted on 3/8/11 at 08:52 PM |
|
|
I swear that I'm losing my mind! That's the second RTFM I've had in 48 hours 
I'm forgetting and missing more and more things!
I just borrowed my brother-in-laws drill a short while ago and he put the chuck in the holder on the flex right in front of me. Went back down to my
garage and the bit worked loose. My brother-in-law managed to remain straight-faced when I trekked back round to his workshop to ask for the chuck!
PS - Thanks Doug!
It's Evolution Baby!
|
|
|
scootz
|
| posted on 3/8/11 at 08:58 PM |
|
|
Good grief... it wasn't even 48 hours... it was 24!
It's Evolution Baby!
|
|
|
