Stuart_B
|
| posted on 25/9/08 at 04:09 PM |
|
|
headlights
hi all, is there way so i can get my headlight's at the correct angle and height, so i do not need to do it at my sva?
thanks
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
|
|
Andi
|
| posted on 25/9/08 at 04:17 PM |
|
|
You could line up your tin top (presumably it has passed MOT) against a wall mark where you positioned the car on the floor and mark where your lights
shine on the wall (both main and hi beam)
Got mine through the MOT a couple of weeks ago.
|
|
|
Stuart_B
|
| posted on 25/9/08 at 04:23 PM |
|
|
has any body got the What the SVA defines the dipped beam max/min height and the distance from side
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
russbost
|
| posted on 25/9/08 at 05:01 PM |
|
|
Max 400mm from widest point, min 500mm separation IIRC
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
.jpg)
