givemethebighammer
|
| posted on 2/2/05 at 10:21 PM |
|
|
Exhaust heat wrap
Now have my SVA date 15th Feb and only have a few things left to sort out.
One of them is covering the "sharp" (in SVA terms) bits of the exhaust system. I intend to wrap some rubber strips in aluminised cloth (see
pic) and secure it round the exhaust clamp and silencer mountings with copper wire. Question is :
aluminised side of the cloth in contact with the hot exhaust or woven side in contact with the exhaust ?
[Edited on 2/2/05 by givemethebighammer]
 
Rescued attachment heat_screen.jpg
|
|
|
|
|
JoelP
|
| posted on 2/2/05 at 11:01 PM |
|
|
my heat wrap didnt have an aluminised side, just woven cloth throughout, so i cant really help there... smokes like a bastard when it first gets hot
though!
Beware! Bourettes is binfectious.
|
|
|
indykid
|
| posted on 3/2/05 at 10:14 AM |
|
|
woven side to the exhaust assuming it is glass fibreish. that stops conduction of heat. the aluminised side is to stop radiation of heat it would
appear.
hth
tom
|
|
|
givemethebighammer
|
| posted on 3/2/05 at 12:20 PM |
|
|
thanks - wasn't too sure myself
|
|
|
