RichardK
|
| posted on 18/2/07 at 10:20 PM |
|
|
3 Point Harness Mount
Can anybody see any problems with this before I weld it up, due to me having bench seats I have loads of height so thats not a problem.
Other pictures of it are in my gallery link below.
Cheers
Rich
[Edited on 18/2/07 by RichardK]
Gallery updated 11/01/2011
|
|
|
|
|
RazMan
|
| posted on 18/2/07 at 10:22 PM |
|
|
Looks fairly hefty to me so no problem 
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Ketchup
|
| posted on 18/2/07 at 10:59 PM |
|
|
just check the hight is ok from base of seat for sva, i had to raise mine a bit even with a grp seat, i think they put a wedge in the seat and
measeure from that, cant remeber the min requirement but a quick search should bring it up. def looks strong enough tho
just read the hight not a problem bit! 
[Edited on 18/2/07 by Ketchup]
|
|
|
