Does any body have experience with wide track wishbones? where did you get them from? do the westfield ones fit a locost?

Made mine, if you can weld its not hard.

Get a bit of mdf and carefully mark out, screw some small blocks of wood to support the metal and you now have a jig, it's all in one plane.

You can cut your existing bones up for the ends so just need some new steel for the straight lengths, I used scrap landrover Panhard rods as a source for this.

[Edited on 26/5/13 by mark chandler]

unfortunately I cant weld, hence looking to get some from another source