Does anyone know what the JIC sizes refer to. i.e. what size in milimetres is a jic -6 for example and more to the point what size hose would you need to fit a -12 jic fitting, any ideas.

Mike

NSdev gave some good info on a similar questio i asked a while back on hoses and connectors etc. there were also some good links that might answer your question on there. worth a quick search..

Ned.

ps i'm too nice, try here: http://www.locostbuilders.co.uk/viewthread.php?tid=24486

[Edited on 18/7/05 by ned]

cheers Ned, saves me writing it all again!

-12 is 12/16" which is obviously 3/4" so you'll need 3/4" BORE hose to suit that fitting size.

cheers

Nat

Cheers guys that was very useful, off to Think Auto this afternoon to spend some more money.

Cheers Mike

Brilliant people at Think Automotive (strange place though, not at all what you'd expect in terms of the building/surroundings!!!) but you'll come out VERY poor!!!!!!

Superb service though, they know EVERYTHING about automotive (and military!) plumbing!!