At the front i was using sierra parts. As i have reconned hubs etc, is there anyway of using the sierra uprights? Just wanted to use the hubs as they are all enamelled and have new bearings and disks with them which would be a shame to waste. Many thanks, Jon

Yep you sure can. You just require some mushroom adapters from mk or mac1 motorsport gts ect

And different length bones due to the change in geometry of the ball joints.

Pat...

If your running maxi ball joints ul have to get the taper machined too..

or use mk2 astra jobbies iirc

cheers eveyone!!