Hi,
can any one help me im setting up a autotune gemini rolling chassis, and require the ride height for the front and rear to the bottom of the chassis, so I dont have to mess about lifting the body on and off, as I am fitting a
4age and it is pretty tight and sits very low down, trying to work it all out.
Thanks alot

The ride height is going to depend on the rate of the springs you have, the weight of the engine, and the amount of preload.

I have the pre load wound right to the top to gaet as much clearance as poss. The big Alfa has the sump chopped but still hangs down low.

[Edited on 24/8/2005 by Trev Borg]