hi all
just read a couple of other posts im setting the ride height on my blade power mk.
where do i measure ride height from?
sump and then bttom of rear chassis.


or front chassis to floor and rear chassis to floor i know i should have the rear about 15-20mm higher than the front but not sure where to take the right measurments.

thanks
simon

Normaly people talk about the chassis rail height, but rember to take into acount the sump clearence as well !!

Jason

Rear of cockpit floor presumably, then which bit at the front? - front of footwell, or the cross member by the front axle?

quote:

---

Originally posted by Deckman001
Normaly people talk about the chassis rail height, but rember to take into acount the sump clearence as well !!

Jason

---