Anyone know how to remove / disable the steering lock part off a sierra column?
I need to do this for next years sprint and hillclimb season, plus the lock only works one way at the moment??


P.S dont say crowbar through the steering wheel

knock the rollpin out at the bottom

Can't quite remember how but it comes out pretty easily if you have the key!

Hope some1's handyer with the Haynes than me and can give you a proper answer lol.

Try with the key in a few positions am sure it'll make sence eventually!

Put the key in, turn to acc, press in the little button on the side and pull the key and the whole lot comes out

quote:

---

Originally posted by skydivepaul
Anyone know how to remove / disable the steering lock part off a sierra column?
I need to do this for next years sprint and hillclimb season, plus the lock only works one way at the moment??


P.S dont say crowbar through the steering wheel

---

quote:

---

Originally posted by Mark Allanson
Put the key in, turn to acc, press in the little button on the side and pull the key and the whole lot comes out

---

It is just a small stud at about 11 OClock viewed from the end, a ballpoint pen is enough pressure to release

That's to remove the barrel, not disable the steering lock. I've hacksawed all the lot off mine for the time being as I didn't have a key.