Has any one used these and if so does any one have any photos.

i'd second that.

Here you go.









ATB Dan.

Is that a hanging box or floor mounted. Hard to tell by the pics.
Dale

The clutch and brake are floor mounted, brake bias bar for fr and rr master cylinders. The acc is top mounted.
HAve had no probs with mine,i did re weld the acc with an offset to give my size 11's a bit more room on the brake.
chas

I have the master cylinders but would need the bias bar etc does the box come with this or is it extra

If you don't need the bias bar, MK would be a good alternative.

The simplest pedal box on the market and give the most legroom - and use the standard Sierra master cylinder.

Pat...

Sorry my post was a little confusing. We have two master cyinders sutible to attach to a bias pedal box like the stuart taylor one thats why I wanted to know if it come complete with the bias bar linkage.

it doesn't include the bias bar.

Dan.

Luego's bias pedal box looks very similar as well

Jason

quote:

---

Originally posted by Deckman001
Luego's bias pedal box looks very similar as well

Jason

---

The luego one is the same as far as I have seen.

I have a ST one as well.............................which pretty much inspired me to make my own to be honest!!!!

Mike, I'll get onto the pedal box thing asap...........been into NSI and introduced myself this afternoon (had afternoon off work) with an initial laser cutting order so hopefully as soon as I can get some more drawings done I can get some quotes on further lasered bits.

I can produce them manually as we discussed as a one/two off but if a few were to be sold then I'd want to laser them.