Board logo

Springs
piddy - 12/1/06 at 01:07 PM

wheres the best (cheapest) place to buy
1.9 9" 180 rear springs?

Jon Ison - 12/1/06 at 03:23 PM

probably rally design.

NS Dev - 12/1/06 at 03:38 PM

Funnily enough just ordered my springs from Rally Design, as well as a sh**load of other stuff.

Mark Allanson - 12/1/06 at 03:58 PM

quote:
Originally posted by NS Dev
Funnily enough just ordered my springs from Rally Design, as well as a sh**load of other stuff.



Why would you ** out the ed in shedload?

Syd Bridge - 12/1/06 at 04:15 PM

http://www.dfaulknersprings.co.uk

Not the cheapest by a long way, but the number on the spring is exactly what it is.

These people make the springs for most UK teams. BTCC etc.....

Anti roll bars to personal spec, as well.

Syd.

NS Dev - 12/1/06 at 04:31 PM

Will second that, yer gets what yer pays for, and the faulkner ones are good compared to the "ten star" offerings from rally design, but then when I put my 10 star ones on the scales under the press they came out good!

Danozeman - 12/1/06 at 04:53 PM

MNR are good for springs. 12 quid a spring delivered iirc.

Im sure there was a blokey on here selling a pair of 9 inch 180s.

Jon Ison - 12/1/06 at 06:10 PM

I did say rally design, but have you checked out any local manufacturers ? I used too use them till i found a local spring company that will make too any spec, length ect..... a lot of weight too be saved by using shortest possible springs, they each come with a data sheet, powder coated and cheaper than mentioned above.