Have any of you guys used the caliper bolts to mount your cycle wing stays? If so, is it safe?

I realize I'm using a different upright than many of you, but it looks like using a caliper bolt might be the only option...

--Thanks, Chris

perfectly safe as long as nothing compressible is mounted on the bolts which would cause them to lose tension.

I have on my Cortina calipers, no problems. Allow for the thickness of your mounts when you buy bolts, I used 12.9 Allen bolts.

[Edited on 13/1/06 by Peteff]

Thanks gents!

--Chris