The bit that bolts on to the end of the drive shaft CV joints that the big nut screw onto to hold it in to the hub is called the stub axle, right?

Which side has the 'wrong' thread... that is the thread that does up anti-clockwise and comes off clockwise?

I've been supplied with two that are the same and need to get back to the supplier to let them know which one I have and which one I need.

Thanks,

Mark

The one with the left hand thread should be the near side rear (passenger side).

Thanks.

Is it possible to buy just one right hand side stub axle just in case my supplier isn't interested in replacing the wrong one?

Regards,

Mark