ok, does anyone know of a standard direct replacement for cortina upright, but with about 2" more distance between the ball joints?

I could go the route of making some custom ones, but not too keen on the idea. problem is the suspension pick up points on the chassis are for izuzu hubs. cortina ones i guess are shorter, and with the ride height set to absolute minimum the front hubs are about and inch higher than the back axle, and thats with the front wishbones parallel with the ground. don't want them angled down you see...


any ideas?

[Edited on 23/3/07 by blakep82]

[Edited on 24/3/07 by blakep82]

what about granada uprights? will they work instead? are they any 'taller'?

no?