Does anyone know off the top of their head if the Freelander Diff would be compatible with Caterham de-Dion Driveshafts?

Also, any good tips for where I can get a propshaft flange to suit?

Cheers

not sure about the drive shafts but mine required the landrover cv joints to be used so the shafts are landrover inboard and sierra outboard end for my fury. the propshaft flag looks to be the same as ford use but i can go and measure it if you need.

No probs Cossie. I'll be heading off down to the 'build-shed' tomorrow, so can measure up then. Thanks for the reply.

freelander diffs are obviously different to sierra ones, hence your driveshafts will only fit if designed for the freelander diff. Whoever you get to make your prop will have the necessary flange for the diff. If you intend to make it yourself, they should still sell you the flange and joints etc.