LocostBuilders - powered by XMB

sierra propshaft flange

gy351100 - 21/4/07 at 07:31 AM

hi
can anyone tell me the pcd of the bolt holes and the locating spigot diameter of a sierra propshaft fange
thanks

Peteff - 21/4/07 at 08:13 AM

The holes are not on a circle they are offset so it can only go in 2 positions.

gy351100 - 21/4/07 at 10:22 AM

hi
yes, sorry i was aware of that
what i need are the dimentions
is it the same as the escort