Board logo

c spanners
nib1980 - 4/8/07 at 09:58 AM

Hi All,

following on from yesterdays post, as i don't have a C spanner, is there an alternative tool to this?

I'm thinking a spring compressor and then i could easily move the platform by hand.

many thanks

UncleFista - 4/8/07 at 10:01 AM

A couple of drill bits the correct size is what I've used before now

BenB - 4/8/07 at 10:45 AM

Spring compressor and hand twisting would work but long term its easier just to buy a C-spanner.... They not that unlocost...

Peteff - 4/8/07 at 10:55 AM

Stilson wrench

paulf - 4/8/07 at 11:32 AM

Neil
I have one that your welcome to borrow, it fits 2,25 avos but will also most likely fit others.
Paul.

nib1980 - 4/8/07 at 12:35 PM

quote:
Originally posted by paulf
Neil
I have one that your welcome to borrow, it fits 2,25 avos but will also most likely fit others.
Paul.


Hi Paul,

Many thanks for the offer but I just measured mine as 1.9s, however my neighbour happened to have an adjustable one so it looks like problem solved.

many thanks all