Hi guys,

I have a standard handbrake lever from rally design and rear calipers off a sierra cosworth. I have just bought a sierra handbrake cable to fit the calipers but:

1. It seems quite long.
2. It doesnt fit to my handbrake lever without some form of modification.

Therefore can anyone recommend a handbrake cable which would suit my setup?

Cheers,

Matt

Usually the hand brake cable has to be cut to length. You can make an attachment for the handbrake lever from a piece of ally.

We do not know your setup so maybe some more info on what you are building would be useful.

[Edited on 6/10/07 by stuart_g]

You'll need to cut the inner and rejoin them with wire clamps.

On my car I had to make a L shape piece of metal bar with holes in both ends to bolt to the handbrake lever and the half-moon balancing crescent.

Thanks for the advice,

I thought I would have to modify it some way like that.

Cheers,

Matt