Hi all,

First post and looking for advice please.

I used to own a westfield and now own a Ginetta

In an ideal world I want to convert it to IRS using sierra IRS setup.
Alternative is de dion axle.

Does anyone have pictures or posted pictures of their setups please ?

What do Locost use for the rear IRS upright?


Thanks in advance


Paul

Hilux,

I used the machined mounting plate from the original sierra semi trailing arms. I cut them off, ground them down and then borrowed a friends surface grinder to get them dead flat. I then created a box around them from 3mm steel and put all the relevant mounts onto it. They're not light, but they do look to be hard as nails. I probably massively over engineered them, but it's better than have one of your wheels ripped off.

Kingr

By the way, any chance you could cut the size of your avatar down a bit please?

Kingr

i used the full system off the sierra. not light but at least its all lined up.

BTW 150 pixels is good for avatars...