I was hoping that some of you kind people would have a look at my brake pipe route (in my photo archive) to see if it's ok before I permanently attach it.

Also am i right in thinking that I need to clip it about every 200mm ?

Thanks in advance,

Chris

looks the same as mine


[Edited on 10/2/08 by afj]

I originally had my brake light switch that way round but it was a problem bleeding to remove trapped air in the switch (brake lights not working consistently), turned the switch through 180 degs problem went away.

It looks as if you will have to be very careful there is no danger of the flexis rubbing, on steering column and on rear suspension for example.

I would agree with all of the previous comments but don't forget that the front flexis will probably need to pass through a panel before you fill with fluid.