Can anyone tell me if there is a brake master cylinder cap with integral fluid level sensor that is compatable with wilwood small master cylinders.

http://www.wilwood.com/Products/006-MasterCylinders/005-CSBMC/index.asp

I understand that there are kits to drill holes in my current caps but If I was designing master cylinders for low volume applications It would make sense to use a tried and tested design of cap from someone elses! hopefully with a fluid level switch!

I can't remember if I've got Girling or Wilwood but mine took a standard Sierra type sensor....

I picked up selection of ford caps with sensors in. They do fit, but the thread is slightly different. In the end, i used a hole saw in the Wilwood caps, dismantled the ford caps, and installed them together. They cost me all of £1 from the scrappy!

[Edited on 13/3/08 by twybrow]

From fiesta or escort will fit